News News



MEK RUB TEST MACHINE

MEK RUB TEST MACHINE

Product Description

The MEK Paint Strength Tester is a machine used to test the solvent resistance (MEK) resistance of colored steel plates. Its working principle is that the friction block with methyl ethyl ketone solvent rubs back and forth on the surface of the colored steel plate according to the pre-set time and frequency. When the friction interval is determined, the resistance of the color plate to methyl ethyl ketone is assessed by the wear condition of the surface being rubbed. Industries of use: furniture, paint colors...etc.

The MEK Rub Test machine has been developed to combat the problem of inconsistent test results between operators. This semi automated machine gives the line operator and quality control personnel the ability to duplicate results from the laboratory to the production line every time.

                             

Conforms to ASTM D7835, EN 13523-11,

Reference: ASTM D 4752, ASTM D 2486, ASTM D 5402; ISO 50230

Technical Data

Weight of Machine:

62.5 lbs. (28.3 kg)

MEK Reservoir Capacity:

425 cc

Mass of Rubbing Block:

6.8 lbs. (3 kg) ASTM / EU Standards 1000g

Stroke Length:

8 inches (203 mm)

Number of strokes/min (Double Rub):

70

Operational Air Pressure:

550 KPa (80 psi)

Max Air Supply Pressure:

965 KPa (140 psi)

Air Consumption @ Operational Pressure:

2.35 SCFM @ 550 KPa (80 psi)

Minimum Flexible Air Line Supply Size:

1/4" I.D.

Air Inlet Connection at Filter:

1/4 NPT

Cotton Pad Size

1-1/2 x 1-3/4, 2 ply

Counter Min/Max Number of Strokes:

1 - 9999

Air Supply:

550 kpa (80 psi) Clean and dry (non condensing)

Dimensions (WxDxH):

18 x 19 x 19 inches(457 x 483 x 483mm)

Test Panel Size:

5 x 12 inches(127 x 305mm)

Electrical Requirements:

None (all pneumatic system)

Panel Thickness Max:**

1/8 inch (3.2mm) **thicker panels can be run with an adjustment

 
☎️Hotline: 02866828856
📧Email: yct.tech.tw@gmail.com

 

0. ..............00